{"title":"TACC Show 2026","description":null,"products":[{"product_id":"abw-slip-joint-45-degree-titanium-magnacut","title":"ABW Slip Joint 2.25\" – 45° Milled Titanium, MagnaCut Stonewash Wharncliffe – Made in USA","description":"\u003ch2\u003eMagnaCut Wharncliffe. Titanium scales. 45 Degree milling. North Carolina made.\u003c\/h2\u003e\n\u003cp\u003eThe American Blade Works Slip Joint is a modern take on a traditional format. Michael Martin CNC-machines every component in-house at his Weaverville, North Carolina shop, including the titanium scales, the MagnaCut Wharncliffe blade, and the backspring. The result is a slip joint that carries the precision of a production knife and the intentionality of a custom. The 2.25\" hollow ground Wharncliffe blade is heat-treated and cryogenically tempered for maximum edge retention, and the stonewash finish gives it a practical, hard-carry character. Phosphor bronze washers and a 416 stainless pivot deliver smooth, consistent pull strength. This version features the 45-degree milling pattern on the titanium scales. The angled cuts create a clean, geometric grip surface with a directional texture that is subtle from a distance and tactile in the hand on the titanium scales.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003eNote from Lone Star Knife \u0026amp; Supply: The 45-degree milling is the most understated pattern in the ABW lineup. The angled cuts catch light differently than flat titanium and give you real grip without aggressive texture. MagnaCut Wharncliffe, 2.2 oz, North Carolina made. A slip joint you will actually reach for.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy This Slip Joint Stands Out\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.25\" CPM MagnaCut Wharncliffe Blade, 3D milled hollow ground, heat-treated and cryogenically tempered\u003c\/li\u003e\n\u003cli\u003e45 Degree Milled Titanium Scales, machined in-house at ABW's North Carolina shop\u003c\/li\u003e\n\u003cli\u003eStonewash finish on both blade and scales for a cohesive hard-carry aesthetic\u003c\/li\u003e\n\u003cli\u003ePhosphor Bronze Washers and 416 Stainless Pivot Hardware\u003c\/li\u003e\n\u003cli\u003eSlip Joint with Half Stop, non-locking and legal everywhere\u003c\/li\u003e\n\u003cli\u003e2.2 oz, one of the lightest MagnaCut pocket knives available\u003c\/li\u003e\n\u003cli\u003eEvery component except screws and bearings made in-house at ABW\u003c\/li\u003e\n\u003cli\u003eMade in the USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: American Blade Works\u003c\/li\u003e\n\u003cli\u003eModel: Slip Joint\u003c\/li\u003e\n\u003cli\u003eBlade Length: 2.25\"\u003c\/li\u003e\n\u003cli\u003eClosed Length: 3.31\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 5.56\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM MagnaCut\u003c\/li\u003e\n\u003cli\u003eBlade Style: Wharncliffe\u003c\/li\u003e\n\u003cli\u003eBlade Grind: 3D Milled Hollow Ground\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Stonewash\u003c\/li\u003e\n\u003cli\u003eHandle Material: Titanium\u003c\/li\u003e\n\u003cli\u003ePivot: Phosphor Bronze Washers\u003c\/li\u003e\n\u003cli\u003eHardware: 416 Stainless\u003c\/li\u003e\n\u003cli\u003eLock Type: Slip Joint (Non-Locking)\u003c\/li\u003e\n\u003cli\u003eHalf Stop: Yes\u003c\/li\u003e\n\u003cli\u003eWeight: 2.2 oz\u003c\/li\u003e\n\u003cli\u003eWarranty: One-Year Limited\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003cli\u003eHandle Pattern: 45 Degree\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You'll Want It\u003c\/h3\u003e\n\u003cp\u003eThe ABW Slip Joint gives you MagnaCut edge retention and titanium construction in a 2.2 oz pocket knife that goes anywhere and cuts through legal restrictions in states where locking knives are regulated. Michael Martin makes every part in North Carolina. At $159 it is one of the strongest values in the American-made traditional knife market.\u003c\/p\u003e\n\u003ch3\u003eAbout American Blade Works\u003c\/h3\u003e\n\u003cp\u003eAmerican Blade Works is a family-owned knife manufacturer based in Weaverville, North Carolina, founded by Michael Martin. Every component except screws and bearings is manufactured in-house, making these true American-made knives. Each knife is CNC-machined in Martin's home shop, combining precision manufacturing with artisan attention to detail. ABW backs every knife with a one-year limited warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"American Blade Works","offers":[{"title":"Default Title","offer_id":44233772597428,"sku":"ABW-SJ-45DEG","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/IMG_5414.jpg?v=1779814326"},{"product_id":"abw-slip-joint-diamond-titanium-magnacut","title":"ABW Slip Joint 2.25\" – Diamond Milled Titanium, MagnaCut Stonewash Wharncliffe – Made in USA","description":"\u003ch2\u003eMagnaCut Wharncliffe. Titanium scales. Diamond milling. North Carolina made.\u003c\/h2\u003e\n\u003cp\u003eThe American Blade Works Slip Joint is a modern take on a traditional format. Michael Martin CNC-machines every component in-house at his Weaverville, North Carolina shop, including the titanium scales, the MagnaCut Wharncliffe blade, and the backspring. The result is a slip joint that carries the precision of a production knife and the intentionality of a custom. The 2.25\" hollow ground Wharncliffe blade is heat-treated and cryogenically tempered for maximum edge retention, and the stonewash finish gives it a practical, hard-carry character. Phosphor bronze washers and a 416 stainless pivot deliver smooth, consistent pull strength. This version features the diamond milling pattern on the titanium scales. The intersecting cuts create a repeating geometric grip surface with visual depth and positive traction on the titanium scales.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003eNote from Lone Star Knife \u0026amp; Supply: The diamond pattern gives the ABW Slip Joint one of the most refined-looking handle textures in the lineup. Repeating geometry, positive traction, MagnaCut Wharncliffe, 2.2 oz. North Carolina made by one person who machines everything himself.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy This Slip Joint Stands Out\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.25\" CPM MagnaCut Wharncliffe Blade, 3D milled hollow ground, heat-treated and cryogenically tempered\u003c\/li\u003e\n\u003cli\u003eDiamond Milled Titanium Scales, machined in-house at ABW's North Carolina shop\u003c\/li\u003e\n\u003cli\u003eStonewash finish on both blade and scales for a cohesive hard-carry aesthetic\u003c\/li\u003e\n\u003cli\u003ePhosphor Bronze Washers and 416 Stainless Pivot Hardware\u003c\/li\u003e\n\u003cli\u003eSlip Joint with Half Stop, non-locking and legal everywhere\u003c\/li\u003e\n\u003cli\u003e2.2 oz, one of the lightest MagnaCut pocket knives available\u003c\/li\u003e\n\u003cli\u003eEvery component except screws and bearings made in-house at ABW\u003c\/li\u003e\n\u003cli\u003eMade in the USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: American Blade Works\u003c\/li\u003e\n\u003cli\u003eModel: Slip Joint\u003c\/li\u003e\n\u003cli\u003eBlade Length: 2.25\"\u003c\/li\u003e\n\u003cli\u003eClosed Length: 3.31\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 5.56\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM MagnaCut\u003c\/li\u003e\n\u003cli\u003eBlade Style: Wharncliffe\u003c\/li\u003e\n\u003cli\u003eBlade Grind: 3D Milled Hollow Ground\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Stonewash\u003c\/li\u003e\n\u003cli\u003eHandle Material: Titanium\u003c\/li\u003e\n\u003cli\u003ePivot: Phosphor Bronze Washers\u003c\/li\u003e\n\u003cli\u003eHardware: 416 Stainless\u003c\/li\u003e\n\u003cli\u003eLock Type: Slip Joint (Non-Locking)\u003c\/li\u003e\n\u003cli\u003eHalf Stop: Yes\u003c\/li\u003e\n\u003cli\u003eWeight: 2.2 oz\u003c\/li\u003e\n\u003cli\u003eWarranty: One-Year Limited\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003cli\u003eHandle Pattern: Diamond\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You'll Want It\u003c\/h3\u003e\n\u003cp\u003eThe ABW Slip Joint gives you MagnaCut edge retention and titanium construction in a 2.2 oz pocket knife that goes anywhere and cuts through legal restrictions in states where locking knives are regulated. Michael Martin makes every part in North Carolina. At $159 it is one of the strongest values in the American-made traditional knife market.\u003c\/p\u003e\n\u003ch3\u003eAbout American Blade Works\u003c\/h3\u003e\n\u003cp\u003eAmerican Blade Works is a family-owned knife manufacturer based in Weaverville, North Carolina, founded by Michael Martin. Every component except screws and bearings is manufactured in-house, making these true American-made knives. Each knife is CNC-machined in Martin's home shop, combining precision manufacturing with artisan attention to detail. ABW backs every knife with a one-year limited warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"American Blade Works","offers":[{"title":"Default Title","offer_id":44233772630196,"sku":"ABW-SJ-DIAMOND","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/IMG_5420.jpg?v=1779814475"},{"product_id":"abw-slip-joint-frag-titanium-magnacut","title":"ABW Slip Joint 2.25\" – Frag Milled Titanium, MagnaCut Stonewash Wharncliffe – Made in USA","description":"\u003ch2\u003eMagnaCut Wharncliffe. Titanium scales. Frag milling. North Carolina made.\u003c\/h2\u003e\n\u003cp\u003eThe American Blade Works Slip Joint is a modern take on a traditional format. Michael Martin CNC-machines every component in-house at his Weaverville, North Carolina shop, including the titanium scales, the MagnaCut Wharncliffe blade, and the backspring. The result is a slip joint that carries the precision of a production knife and the intentionality of a custom. The 2.25\" hollow ground Wharncliffe blade is heat-treated and cryogenically tempered for maximum edge retention, and the stonewash finish gives it a practical, hard-carry character. Phosphor bronze washers and a 416 stainless pivot deliver smooth, consistent pull strength. This version features the Frag milling pattern on the titanium scales. The fragmentation-style texture creates an aggressive, multi-directional grip surface that maximizes traction on the titanium scales.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003eNote from Lone Star Knife \u0026amp; Supply: The Frag pattern is the most aggressive-looking handle in the ABW Slip Joint lineup. Multi-directional texture, maximum traction, same MagnaCut Wharncliffe and 2.2 oz as the rest of the family. If you want a slip joint that looks as capable as it performs, this is the version.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy This Slip Joint Stands Out\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.25\" CPM MagnaCut Wharncliffe Blade, 3D milled hollow ground, heat-treated and cryogenically tempered\u003c\/li\u003e\n\u003cli\u003eFrag Milled Titanium Scales, machined in-house at ABW's North Carolina shop\u003c\/li\u003e\n\u003cli\u003eFrag Pattern provides the most aggressive grip texture in the ABW Slip Joint lineup\u003c\/li\u003e\n\u003cli\u003eStonewash finish on both blade and scales for a cohesive hard-carry aesthetic\u003c\/li\u003e\n\u003cli\u003ePhosphor Bronze Washers and 416 Stainless Pivot Hardware\u003c\/li\u003e\n\u003cli\u003eSlip Joint with Half Stop, non-locking and legal everywhere\u003c\/li\u003e\n\u003cli\u003e2.2 oz, one of the lightest MagnaCut pocket knives available\u003c\/li\u003e\n\u003cli\u003eEvery component except screws and bearings made in-house at ABW\u003c\/li\u003e\n\u003cli\u003eMade in the USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: American Blade Works\u003c\/li\u003e\n\u003cli\u003eModel: Slip Joint\u003c\/li\u003e\n\u003cli\u003eBlade Length: 2.25\"\u003c\/li\u003e\n\u003cli\u003eClosed Length: 3.31\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 5.56\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM MagnaCut\u003c\/li\u003e\n\u003cli\u003eBlade Style: Wharncliffe\u003c\/li\u003e\n\u003cli\u003eBlade Grind: 3D Milled Hollow Ground\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Stonewash\u003c\/li\u003e\n\u003cli\u003eHandle Material: Titanium\u003c\/li\u003e\n\u003cli\u003ePivot: Phosphor Bronze Washers\u003c\/li\u003e\n\u003cli\u003eHardware: 416 Stainless\u003c\/li\u003e\n\u003cli\u003eLock Type: Slip Joint (Non-Locking)\u003c\/li\u003e\n\u003cli\u003eHalf Stop: Yes\u003c\/li\u003e\n\u003cli\u003eWeight: 2.2 oz\u003c\/li\u003e\n\u003cli\u003eWarranty: One-Year Limited\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003cli\u003eHandle Pattern: Frag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You'll Want It\u003c\/h3\u003e\n\u003cp\u003eThe ABW Slip Joint gives you MagnaCut edge retention and titanium construction in a 2.2 oz pocket knife that goes anywhere and cuts through legal restrictions in states where locking knives are regulated. Michael Martin makes every part in North Carolina. At $159 it is one of the strongest values in the American-made traditional knife market.\u003c\/p\u003e\n\u003ch3\u003eAbout American Blade Works\u003c\/h3\u003e\n\u003cp\u003eAmerican Blade Works is a family-owned knife manufacturer based in Weaverville, North Carolina, founded by Michael Martin. Every component except screws and bearings is manufactured in-house, making these true American-made knives. Each knife is CNC-machined in Martin's home shop, combining precision manufacturing with artisan attention to detail. ABW backs every knife with a one-year limited warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"American Blade Works","offers":[{"title":"Default Title","offer_id":44233772662964,"sku":"ABW-SJ-FRAG","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/IMG_5417.jpg?v=1779814410"},{"product_id":"abw-slip-joint-straight-titanium-magnacut","title":"ABW Slip Joint 2.25\" – Straight Milled Titanium, MagnaCut Stonewash Wharncliffe – Made in USA","description":"\u003ch2\u003eMagnaCut Wharncliffe. Titanium scales. Straight milling. North Carolina made.\u003c\/h2\u003e\n\u003cp\u003eThe American Blade Works Slip Joint is a modern take on a traditional format. Michael Martin CNC-machines every component in-house at his Weaverville, North Carolina shop, including the titanium scales, the MagnaCut Wharncliffe blade, and the backspring. The result is a slip joint that carries the precision of a production knife and the intentionality of a custom. The 2.25\" hollow ground Wharncliffe blade is heat-treated and cryogenically tempered for maximum edge retention, and the stonewash finish gives it a practical, hard-carry character. Phosphor bronze washers and a 416 stainless pivot deliver smooth, consistent pull strength. This version features the Straight milling pattern on the titanium scales. Clean parallel lines run the length of the handle, creating a refined, minimalist surface that is the most understated in the ABW lineup on the titanium scales.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003eNote from Lone Star Knife \u0026amp; Supply: The Straight milling is the cleanest look in the ABW Slip Joint family. Parallel lines on titanium against a stonewash Wharncliffe is an intentionally simple combination. MagnaCut, 2.2 oz, North Carolina made. This is the version for people who want the performance without the texture.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy This Slip Joint Stands Out\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.25\" CPM MagnaCut Wharncliffe Blade, 3D milled hollow ground, heat-treated and cryogenically tempered\u003c\/li\u003e\n\u003cli\u003eStraight Milled Titanium Scales, machined in-house at ABW's North Carolina shop\u003c\/li\u003e\n\u003cli\u003eStonewash finish on both blade and scales for a cohesive hard-carry aesthetic\u003c\/li\u003e\n\u003cli\u003ePhosphor Bronze Washers and 416 Stainless Pivot Hardware\u003c\/li\u003e\n\u003cli\u003eSlip Joint with Half Stop, non-locking and legal everywhere\u003c\/li\u003e\n\u003cli\u003e2.2 oz, one of the lightest MagnaCut pocket knives available\u003c\/li\u003e\n\u003cli\u003eEvery component except screws and bearings made in-house at ABW\u003c\/li\u003e\n\u003cli\u003eMade in the USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: American Blade Works\u003c\/li\u003e\n\u003cli\u003eModel: Slip Joint\u003c\/li\u003e\n\u003cli\u003eBlade Length: 2.25\"\u003c\/li\u003e\n\u003cli\u003eClosed Length: 3.31\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 5.56\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM MagnaCut\u003c\/li\u003e\n\u003cli\u003eBlade Style: Wharncliffe\u003c\/li\u003e\n\u003cli\u003eBlade Grind: 3D Milled Hollow Ground\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Stonewash\u003c\/li\u003e\n\u003cli\u003eHandle Material: Titanium\u003c\/li\u003e\n\u003cli\u003ePivot: Phosphor Bronze Washers\u003c\/li\u003e\n\u003cli\u003eHardware: 416 Stainless\u003c\/li\u003e\n\u003cli\u003eLock Type: Slip Joint (Non-Locking)\u003c\/li\u003e\n\u003cli\u003eHalf Stop: Yes\u003c\/li\u003e\n\u003cli\u003eWeight: 2.2 oz\u003c\/li\u003e\n\u003cli\u003eWarranty: One-Year Limited\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003cli\u003eHandle Pattern: Straight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You'll Want It\u003c\/h3\u003e\n\u003cp\u003eThe ABW Slip Joint gives you MagnaCut edge retention and titanium construction in a 2.2 oz pocket knife that goes anywhere and cuts through legal restrictions in states where locking knives are regulated. Michael Martin makes every part in North Carolina. At $159 it is one of the strongest values in the American-made traditional knife market.\u003c\/p\u003e\n\u003ch3\u003eAbout American Blade Works\u003c\/h3\u003e\n\u003cp\u003eAmerican Blade Works is a family-owned knife manufacturer based in Weaverville, North Carolina, founded by Michael Martin. Every component except screws and bearings is manufactured in-house, making these true American-made knives. Each knife is CNC-machined in Martin's home shop, combining precision manufacturing with artisan attention to detail. ABW backs every knife with a one-year limited warranty against defects in materials and workmanship.\u003c\/p\u003e","brand":"American Blade Works","offers":[{"title":"Default Title","offer_id":44233772695732,"sku":"ABW-SJ-STRAIGHT","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/IMG_5423.jpg?v=1779814510"},{"product_id":"american-blade-works-model-1-folding-knife-titanium-3-25-magnacut-button-lock-made-in-usa-abw-m1-ti-button","title":"ABW Model 1 Folding Knife - Titanium, 3.25\" MagnaCut, Button Lock - Made in USA (ABW-M1-TI-BUTTON)","description":"\u003cp\u003eThis is the ABW Model 1 in a full titanium handle with a button lock. It is a new take on the Model 1 platform from American Blade Works, Michael Martin's shop in Weaverville, North Carolina, built around a 3.25 inch MagnaCut blade.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Model 1\u003c\/li\u003e\n\u003cli\u003eBlade Length: 3.25\"\u003c\/li\u003e\n\u003cli\u003eClosed Length: 4.67\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM MagnaCut\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Light stonewash with 3D milling\u003c\/li\u003e\n\u003cli\u003eHandle Material: Titanium\u003c\/li\u003e\n\u003cli\u003eLock Type: Button lock\u003c\/li\u003e\n\u003cli\u003eDeployment: Thumb stud\u003c\/li\u003e\n\u003cli\u003eBearings: Ceramic caged bearings\u003c\/li\u003e\n\u003cli\u003ePivot: Hardened 416 stainless\u003c\/li\u003e\n\u003cli\u003eBackspacer: Titanium\u003c\/li\u003e\n\u003cli\u003ePocket Clip: Titanium\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Model 1 Platform\u003c\/h3\u003e\u003cp\u003eThe Model 1 is ABW's everyday carry folder, and this version puts it in a full titanium handle. Titanium adds a bit of weight and a more solid feel in hand while keeping the clean lines and balance of the platform. It rides on ceramic caged bearings with a hardened 416 stainless pivot, so the action stays smooth and consistent.\u003c\/p\u003e\u003ch3\u003eButton Lock\u003c\/h3\u003e\u003cp\u003eThis version uses a button lock. You press the button to unlock the blade and close it one handed, which is a change from the liner lock on the standard Model 1. It is a simple, strong way to run a manual folder.\u003c\/p\u003e\u003ch3\u003eMagnaCut Blade\u003c\/h3\u003e\u003cp\u003eThe 3.25 inch blade is CPM MagnaCut, heat treated and cryogenically tempered for a balance of edge retention and corrosion resistance, with the toughness to take daily use. A light stonewash with 3D milling gives the blade some visual depth while keeping it practical.\u003c\/p\u003e\u003ch3\u003eMade in the USA\u003c\/h3\u003e\u003cp\u003eAmerican Blade Works is Michael Martin's family-owned shop in Weaverville, North Carolina, and nearly every component is made in house. It is backed by a one-year limited warranty. American mid-tech at this level is exactly what we like to carry.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eThis is the Model 1 in its most refined build, full titanium with a button lock, in MagnaCut, made in North Carolina. If you want the top version of the platform, this is it.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"American Blade Works","offers":[{"title":"Default Title","offer_id":44378011107508,"sku":"ABW-M1-TI-BUTTON","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/IMG-0576.jpg?v=1788699398"},{"product_id":"american-blade-works-model-3-manual-folding-knife-frag-milled-g10-3-3-magnacut-button-liner-lock-made-in-usa-abw-m3-g10-frag","title":"ABW Model 3 Manual Folding Knife - Frag-Milled G10, 3.3\" MagnaCut, Button Liner Lock - Made in USA (ABW-M3-G10-FRAG)","description":"\u003cp\u003eThis is the ABW Model 3 Manual with a frag-milled G10 handle. It is Michael Martin's most refined manual folder from American Blade Works in Weaverville, North Carolina, with a 3.3 inch MagnaCut blade and a fragmentation pattern milled into the G10 scales.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Model 3 Manual\u003c\/li\u003e\n\u003cli\u003eBlade Length: 3.3\"\u003c\/li\u003e\n\u003cli\u003eClosed Length: 4.5\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM MagnaCut (64 HRC)\u003c\/li\u003e\n\u003cli\u003eBlade Grind: Smooth\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Stonewash\u003c\/li\u003e\n\u003cli\u003eBlade Style: Sheepsfoot\u003c\/li\u003e\n\u003cli\u003eHandle Material: Frag-milled G10\u003c\/li\u003e\n\u003cli\u003eLock Type: Button liner lock\u003c\/li\u003e\n\u003cli\u003eDeployment: Thumb stud\u003c\/li\u003e\n\u003cli\u003ePivot: Hardened 416 stainless\u003c\/li\u003e\n\u003cli\u003ePocket Clip: Titanium, deep carry\u003c\/li\u003e\n\u003cli\u003eBackspacer: Stainless\u003c\/li\u003e\n\u003cli\u003eWeight: 3.8 oz\u003c\/li\u003e\n\u003cli\u003eWarranty: One-year limited\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: USA (Weaverville, North Carolina)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Model 3 Platform\u003c\/h3\u003e\u003cp\u003eThe Model 3 is ABW's most refined manual folder. It runs a button liner lock with thumb stud deployment, so you press the button to disengage and open one handed. The 3.3 inch MagnaCut blade uses a smooth grind rather than stepped milling, which gives it cleaner geometry behind the edge for better slicing.\u003c\/p\u003e\u003ch3\u003eFrag-Milled G10\u003c\/h3\u003e\u003cp\u003eThis version wears a fragmentation pattern milled into the G10 scales, and it comes in a range of colors. The frag texture adds grip and a more aggressive look, and G10 carries warmer and grips more positively than aluminum. Pick your color from the options above.\u003c\/p\u003e\u003ch3\u003eMagnaCut Blade\u003c\/h3\u003e\u003cp\u003eThe blade is CPM MagnaCut at 64 HRC, heat treated and cryogenically tempered. It holds an edge and resists rust, and the smooth grind makes it a clean slicer for everyday tasks. A stonewash finish hides normal wear.\u003c\/p\u003e\u003ch3\u003eMade in the USA\u003c\/h3\u003e\u003cp\u003eAmerican Blade Works is Michael Martin's family-owned shop in Weaverville, North Carolina, and he machines nearly every component himself. It is backed by a one-year limited warranty. This is American mid-tech done right.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eThe Model 3 with a frag-milled G10 handle gives you the refined button liner lock platform with extra grip and a more tactical look, all in MagnaCut and made in North Carolina.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"American Blade Works","offers":[{"title":"Green","offer_id":44378793607348,"sku":"ABW-M3-FRAG-GRN","price":250.0,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":44378793640116,"sku":"ABW-M3-FRAG-ORG","price":250.0,"currency_code":"USD","in_stock":false},{"title":"OD Green","offer_id":44378793672884,"sku":"ABW-M3-FRAG-ODGRN","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":44378793705652,"sku":"ABW-M3-FRAG-BLUE","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Black \u0026 Tan","offer_id":44378793738420,"sku":"ABW-M3-FRAG-BLKTAN","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Olive","offer_id":44378793771188,"sku":"ABW-M3-FRAG-OLIVE","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":44378793574580,"sku":"ABW-M3-FRAG-GRAY","price":250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/IMG-0584.jpg?v=1788709257"},{"product_id":"hypercut-mfg-dharma-automatic-serial-0223-3-2-s45vn-tanto-natural-dragon-scale-titanium-zirconium-pivot-made-in-usa-hc-dharma-auto-0223","title":"Hypercut MFG Dharma Automatic Serial 0223 - 3.2\" S45VN Tanto, Natural Dragon Scale Titanium, Zirconium Pivot - Made in USA (HC-DHARMA-AUTO-0223)","description":"\u003cp\u003eThis is the Hypercut MFG Dharma Automatic, serial number 0223, built by Dylan Davis in Mills River, North Carolina. It runs a 3.2 inch CPM S45VN tanto blade on a side opening automatic action, with titanium scales milled in a dragon scale pattern and left in natural finish, paired with a zirconium pivot.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dharma Automatic\u003c\/li\u003e\n\u003cli\u003eSerial Number: 0223\u003c\/li\u003e\n\u003cli\u003eBlade Length: 3.2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 7.3\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM S45VN\u003c\/li\u003e\n\u003cli\u003eBlade Style: Tanto\u003c\/li\u003e\n\u003cli\u003eAction: Single action out the side automatic\u003c\/li\u003e\n\u003cli\u003eHandle Material: Titanium, dragon scale milling, natural finish\u003c\/li\u003e\n\u003cli\u003ePivot: Zirconium\u003c\/li\u003e\n\u003cli\u003eBackspacer: Titanium\u003c\/li\u003e\n\u003cli\u003ePocket Clip: Titanium\u003c\/li\u003e\n\u003cli\u003eDesigner: Dylan Davis\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Mills River, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: HC-DHARMA-AUTO-0223\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Dharma Platform\u003c\/h3\u003e\u003cp\u003eThe Dharma is Hypercut's automatic folder and the model the shop is best known for. It is a single action out the side design at 7.3 inches overall with a 3.2 inch blade, so it carries like a normal folder and opens with a button press. Dylan machines the parts in house, and the fit between the scales and the blade is where the shop's tolerances show.\u003c\/p\u003e\u003ch3\u003eCPM S45VN Blade\u003c\/h3\u003e\u003cp\u003eS45VN is a stainless steel built for edge retention and corrosion resistance, with more toughness than the S30V and S35VN steels it followed. On a tanto profile you get a reinforced tip that holds up to harder use while the straight primary edge stays easy to sharpen.\u003c\/p\u003e\u003ch3\u003eNatural Dragon Scale Titanium\u003c\/h3\u003e\u003cp\u003eThe scales are titanium with a dragon scale pattern milled into the surface, left in natural titanium rather than anodized. The pattern gives the handle grip and catches light differently as you turn it. This one pairs the natural scales with a zirconium pivot and a titanium clip.\u003c\/p\u003e\u003ch3\u003eMade in the USA\u003c\/h3\u003e\u003cp\u003eHypercut Manufacturing is Dylan plus two people in Mills River, North Carolina, machining everything in house. Every Dharma is serial numbered, and Hypercut backs them with a warranty and a spa service that will refinish a knife to keep it right.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eSerial 0223 is one knife in one configuration. Natural dragon scale titanium and a zirconium pivot on the S45VN Dharma, made in North Carolina by a shop that runs small batches. When it sells, this exact build is gone.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Hypercut Manufacturing","offers":[{"title":"Default Title","offer_id":44378865303732,"sku":"HC-DHARMA-AUTO-0223","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/27CF9532-B0C6-4BA4-AFFB-45115EEE58B1.jpg?v=1788744947"},{"product_id":"hypercut-mfg-dharma-automatic-serial-0235-3-2-s45vn-tanto-green-honeycomb-titanium-made-in-usa-hc-dharma-auto-0235","title":"Hypercut MFG Dharma Automatic Serial 0235 - 3.2\" S45VN Tanto, Green Honeycomb Titanium - Made in USA (HC-DHARMA-AUTO-0235)","description":"\u003cp\u003eThis is the Hypercut MFG Dharma Automatic, serial number 0235, built by Dylan Davis in Mills River, North Carolina. It runs a 3.2 inch CPM S45VN tanto blade on a side opening automatic action, with titanium scales milled in a honeycomb pattern and anodized green.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dharma Automatic\u003c\/li\u003e\n\u003cli\u003eSerial Number: 0235\u003c\/li\u003e\n\u003cli\u003eBlade Length: 3.2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 7.3\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM S45VN\u003c\/li\u003e\n\u003cli\u003eBlade Style: Tanto\u003c\/li\u003e\n\u003cli\u003eAction: Single action out the side automatic\u003c\/li\u003e\n\u003cli\u003eHandle Material: Titanium, honeycomb milling, green anodized\u003c\/li\u003e\n\u003cli\u003ePivot: Titanium\u003c\/li\u003e\n\u003cli\u003eBackspacer: Titanium\u003c\/li\u003e\n\u003cli\u003ePocket Clip: Titanium\u003c\/li\u003e\n\u003cli\u003eDesigner: Dylan Davis\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Mills River, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: HC-DHARMA-AUTO-0235\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Dharma Platform\u003c\/h3\u003e\u003cp\u003eThe Dharma is Hypercut's automatic folder and the model the shop is best known for. It is a single action out the side design at 7.3 inches overall with a 3.2 inch blade, so it carries like a normal folder and opens with a button press. Dylan machines the parts in house, and the fit between the scales and the blade is where the shop's tolerances show.\u003c\/p\u003e\u003ch3\u003eCPM S45VN Blade\u003c\/h3\u003e\u003cp\u003eS45VN is a stainless steel built for edge retention and corrosion resistance, with more toughness than the S30V and S35VN steels it followed. On a tanto profile you get a reinforced tip that holds up to harder use while the straight primary edge stays easy to sharpen.\u003c\/p\u003e\u003ch3\u003eGreen Honeycomb Titanium\u003c\/h3\u003e\u003cp\u003eThe scales on this one are titanium milled in a honeycomb pattern and anodized green. The honeycomb takes weight out of the handle and leaves a texture you can feel without it being rough in pocket. Titanium pivot, backspacer, and clip finish it out.\u003c\/p\u003e\u003ch3\u003eMade in the USA\u003c\/h3\u003e\u003cp\u003eHypercut Manufacturing is Dylan plus two people in Mills River, North Carolina, machining everything in house. Every Dharma is serial numbered, and Hypercut backs them with a warranty and a spa service that will refinish a knife to keep it right.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eThe honeycomb milling is the pattern that made people notice the Dharma, and in green anodize it reads very differently from the natural and dragon scale builds. Serial 0235 is one knife, made in North Carolina, and this exact configuration will not repeat.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Hypercut Manufacturing","offers":[{"title":"Default Title","offer_id":44378865336500,"sku":"HC-DHARMA-AUTO-0235","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/IMG-0847.jpg?v=1788744969"},{"product_id":"hypercut-mfg-dharma-automatic-serial-0221-3-2-s45vn-tanto-blue-dragon-scale-titanium-with-purple-tint-made-in-usa-hc-dharma-auto-0221","title":"Hypercut MFG Dharma Automatic Serial 0221 - 3.2\" S45VN Tanto, Blue Dragon Scale Titanium with Purple Tint - Made in USA (HC-DHARMA-AUTO-0221)","description":"\u003cp\u003eThis is the Hypercut MFG Dharma Automatic, serial number 0221, built by Dylan Davis in Mills River, North Carolina. It runs a 3.2 inch CPM S45VN tanto blade on a side opening automatic action, with dragon scale milled titanium scales anodized blue with a purple tint and a matching purple titanium clip.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dharma Automatic\u003c\/li\u003e\n\u003cli\u003eSerial Number: 0221\u003c\/li\u003e\n\u003cli\u003eBlade Length: 3.2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 7.3\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM S45VN\u003c\/li\u003e\n\u003cli\u003eBlade Style: Tanto\u003c\/li\u003e\n\u003cli\u003eAction: Single action out the side automatic\u003c\/li\u003e\n\u003cli\u003eHandle Material: Titanium, dragon scale milling, blue anodized with purple tint\u003c\/li\u003e\n\u003cli\u003ePivot: Titanium\u003c\/li\u003e\n\u003cli\u003eBackspacer: Titanium\u003c\/li\u003e\n\u003cli\u003ePocket Clip: Purple anodized titanium\u003c\/li\u003e\n\u003cli\u003eDesigner: Dylan Davis\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Mills River, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: HC-DHARMA-AUTO-0221\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Dharma Platform\u003c\/h3\u003e\u003cp\u003eThe Dharma is Hypercut's automatic folder and the model the shop is best known for. It is a single action out the side design at 7.3 inches overall with a 3.2 inch blade, so it carries like a normal folder and opens with a button press. Dylan machines the parts in house, and the fit between the scales and the blade is where the shop's tolerances show.\u003c\/p\u003e\u003ch3\u003eCPM S45VN Blade\u003c\/h3\u003e\u003cp\u003eS45VN is a stainless steel built for edge retention and corrosion resistance, with more toughness than the S30V and S35VN steels it followed. On a tanto profile you get a reinforced tip that holds up to harder use while the straight primary edge stays easy to sharpen.\u003c\/p\u003e\u003ch3\u003eBlue Dragon Scale with Purple Tint\u003c\/h3\u003e\u003cp\u003eThe scales are titanium milled in a dragon scale pattern and anodized blue with a purple tint that shifts depending on how the light hits it. Hypercut matched a purple anodized titanium clip to it, so the color carries across the whole knife. The pivot and backspacer are titanium.\u003c\/p\u003e\u003ch3\u003eMade in the USA\u003c\/h3\u003e\u003cp\u003eHypercut Manufacturing is Dylan plus two people in Mills River, North Carolina, machining everything in house. Every Dharma is serial numbered, and Hypercut backs them with a warranty and a spa service that will refinish a knife to keep it right.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eAnodizing is the part of this build that cannot be repeated exactly, and the blue to purple shift on serial 0221 is specific to this knife. Add the matching purple clip and this is the most colorful Dharma in the group.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Hypercut Manufacturing","offers":[{"title":"Default Title","offer_id":44378865369268,"sku":"HC-DHARMA-AUTO-0221","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/E01FF20B-089A-4175-A6FF-513366DC1587.jpg?v=1788744992"},{"product_id":"hypercut-mfg-dharma-automatic-serial-0218-3-2-s45vn-tanto-green-dragon-scale-titanium-made-in-usa-hc-dharma-auto-0218","title":"Hypercut MFG Dharma Automatic Serial 0218 - 3.2\" S45VN Tanto, Green Dragon Scale Titanium - Made in USA (HC-DHARMA-AUTO-0218)","description":"\u003cp\u003eThis is the Hypercut MFG Dharma Automatic, serial number 0218, built by Dylan Davis in Mills River, North Carolina. It runs a 3.2 inch CPM S45VN tanto blade on a side opening automatic action, with titanium scales milled in a dragon scale pattern and anodized green.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Dharma Automatic\u003c\/li\u003e\n\u003cli\u003eSerial Number: 0218\u003c\/li\u003e\n\u003cli\u003eBlade Length: 3.2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 7.3\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: CPM S45VN\u003c\/li\u003e\n\u003cli\u003eBlade Style: Tanto\u003c\/li\u003e\n\u003cli\u003eAction: Single action out the side automatic\u003c\/li\u003e\n\u003cli\u003eHandle Material: Titanium, dragon scale milling, green anodized\u003c\/li\u003e\n\u003cli\u003ePivot: Titanium\u003c\/li\u003e\n\u003cli\u003eBackspacer: Titanium\u003c\/li\u003e\n\u003cli\u003ePocket Clip: Titanium\u003c\/li\u003e\n\u003cli\u003eDesigner: Dylan Davis\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Mills River, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: HC-DHARMA-AUTO-0218\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Dharma Platform\u003c\/h3\u003e\u003cp\u003eThe Dharma is Hypercut's automatic folder and the model the shop is best known for. It is a single action out the side design at 7.3 inches overall with a 3.2 inch blade, so it carries like a normal folder and opens with a button press. Dylan machines the parts in house, and the fit between the scales and the blade is where the shop's tolerances show.\u003c\/p\u003e\u003ch3\u003eCPM S45VN Blade\u003c\/h3\u003e\u003cp\u003eS45VN is a stainless steel built for edge retention and corrosion resistance, with more toughness than the S30V and S35VN steels it followed. On a tanto profile you get a reinforced tip that holds up to harder use while the straight primary edge stays easy to sharpen.\u003c\/p\u003e\u003ch3\u003eGreen Dragon Scale Titanium\u003c\/h3\u003e\u003cp\u003eThe scales are titanium milled in a dragon scale pattern and anodized green. The milling gives the handle traction and a depth that a flat scale does not have, and the green keeps it from reading as a safe queen. Titanium pivot, backspacer, and clip.\u003c\/p\u003e\u003ch3\u003eMade in the USA\u003c\/h3\u003e\u003cp\u003eHypercut Manufacturing is Dylan plus two people in Mills River, North Carolina, machining everything in house. Every Dharma is serial numbered, and Hypercut backs them with a warranty and a spa service that will refinish a knife to keep it right.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eGreen dragon scale is the most wearable of the four in this batch, colorful enough to be interesting without being loud. Serial 0218 is one knife in this configuration, made in North Carolina.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Hypercut Manufacturing","offers":[{"title":"Default Title","offer_id":44378865402036,"sku":"HC-DHARMA-AUTO-0218","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/4049\/4516\/files\/IMG-0844.jpg?v=1788745010"},{"product_id":"paladin33-market-tote-mk2-small-22l-miami-vice-limited-edition-made-in-usa-p33-tote-mk2-sm-mv","title":"PALADIN33 Miami Vice Market Tote MK2 - Limited Edition - Made in USA (P33-TOTE-MK2-MV)","description":"\u003cp\u003eThis is the PALADIN33 Market Tote MK2 in the limited Miami Vice colorway. It is a structured tote that stands up on its own whether it is full or empty, with a zip top, a front zip pocket, and a pass through on the back that slides over a luggage handle. Paladin33 sews everything in Oregon.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Market Tote MK2\u003c\/li\u003e\n\u003cli\u003eColorway: Miami Vice (limited edition)\u003c\/li\u003e\n\u003cli\u003eClosure: Zip top\u003c\/li\u003e\n\u003cli\u003ePockets: Front zip pocket\u003c\/li\u003e\n\u003cli\u003eLuggage Pass Through: Yes, rear panel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Oregon)\u003c\/li\u003e\n\u003cli\u003eSKU: P33-TOTE-MK2-MV\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIt Stands Up\u003c\/h3\u003e\u003cp\u003eThe reason people buy this tote over a cheaper one is structure. It holds its shape empty, so it does not collapse in a car footwell or fall over on a table when you set it down. The zip top means nothing comes out on a corner, and the rear pass through slides over a roller bag handle so you are not carrying two things through an airport.\u003c\/p\u003e\u003ch3\u003eMiami Vice Colorway\u003c\/h3\u003e\u003cp\u003eMiami Vice is a limited run and it is not part of the standard color lineup. When these seven are gone we do not expect to see them again.\u003c\/p\u003e\u003ch3\u003eMade in the USA\u003c\/h3\u003e\u003cp\u003ePaladin33 cuts and sews in Oregon and runs the shop on a no compromise materials standard. Bags are one of the harder categories to source American made, which is a big part of why we carry them.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eA structured, American sewn tote in a colorway that will not come back. We have seven.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"PALADIN33","offers":[{"title":"Default Title","offer_id":44378879361204,"sku":"P33-TOTE-MK2-MV","price":130.0,"currency_code":"USD","in_stock":true}]},{"product_id":"paladin33-supernova-40l-duffle-miami-vice-limited-edition-x-pac-with-cordura-base-made-in-usa-p33-supernova-40l-mv","title":"PALADIN33 Supernova 40L Duffle - Miami Vice Limited Edition, X-Pac with Cordura Base - Made in USA (P33-SUPERNOVA-40L-MV)","description":"\u003cp\u003eThis is the PALADIN33 Supernova 40 liter Duffle in the limited Miami Vice colorway. It is an ultralight travel duffle built on an X-Pac body with a 1000D Cordura bottom panel, a weather resistant YKK AquaGuard zipper, and removable backpack straps. It is sized to fit most overhead bins. Paladin33 sews everything in Oregon.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Supernova Duffle\u003c\/li\u003e\n\u003cli\u003eCapacity: 40 liters\u003c\/li\u003e\n\u003cli\u003eDimensions: 21\" x 9\" x 13\"\u003c\/li\u003e\n\u003cli\u003eColorway: Miami Vice (limited edition)\u003c\/li\u003e\n\u003cli\u003eBody Material: X-Pac\u003c\/li\u003e\n\u003cli\u003eBottom Panel: 1000D Cordura\u003c\/li\u003e\n\u003cli\u003eMain Zipper: YKK AquaGuard, weather resistant\u003c\/li\u003e\n\u003cli\u003eExternal Pockets: Two zippered side pockets\u003c\/li\u003e\n\u003cli\u003eHandles: Dual grab handles on each end\u003c\/li\u003e\n\u003cli\u003eStraps: Removable backpack straps\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Oregon)\u003c\/li\u003e\n\u003cli\u003eSKU: P33-SUPERNOVA-40L-MV\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eUltralight Without Giving Anything Up\u003c\/h3\u003e\u003cp\u003eMost travel duffles this size are heavy before you put anything in them. The Supernova in X-Pac VX21 weighs 1.3 pounds with the backpack straps attached, which leaves more of your weight allowance for the gear you actually want to bring. The X-Pac body holds its shape even when the bag is empty, so packing and finding things is easier than in a duffle that folds flat.\u003c\/p\u003e\u003ch3\u003eBuilt for Travel\u003c\/h3\u003e\u003cp\u003eThe 40 liter size fits most overhead compartments while using the space well. A YKK AquaGuard zipper keeps rain and snow out of the main compartment. Two external zip pockets hold a phone, a wallet, or a passport where you can reach them. Dual grab handles on each end let you pull it out of an overhead bin or a packed cargo area, and the removable backpack straps take over when the walk gets long.\u003c\/p\u003e\u003ch3\u003eWhere the Wear Happens\u003c\/h3\u003e\u003cp\u003eThe bottom panel is 1000D Cordura, which is the part of a duffle that takes abuse from concrete, gravel, and truck beds. Reinforcing there rather than everywhere is how the bag stays light and still lasts.\u003c\/p\u003e\u003ch3\u003eMiami Vice Colorway\u003c\/h3\u003e\u003cp\u003eMiami Vice is a limited run outside the standard color lineup. We have five.\u003c\/p\u003e\u003ch3\u003eMade in the USA\u003c\/h3\u003e\u003cp\u003ePaladin33 cuts and sews in Oregon. American made bags at this level are rare, and this is the kind of thing we want on the shelf next to the knives.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eAn overhead sized duffle that weighs about as much as a jacket, made in Oregon, in a colorway that will not come back.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"PALADIN33","offers":[{"title":"Default Title","offer_id":44378879393972,"sku":"P33-SUPERNOVA-40L-MV","price":250.0,"currency_code":"USD","in_stock":true}]},{"product_id":"shady-grady-edc-drifter-fixed-blade-o1-darkened-stonewash-green-linen-micarta-leather-sheath-made-in-usa-sg-drifter-o1-grnlinen","title":"Shady Grady EDC Drifter Fixed Blade - O1 Darkened Stonewash, Green Linen Micarta, Leather Sheath - Made in USA (SG-DRIFTER-O1-GRNLINEN)","description":"\u003cp\u003eThis is the Drifter from Shady Grady EDC, made by Grady Jarman in Wilmington, North Carolina. This one runs an O1 tool steel blade in a darkened stonewash finish with green linen micarta scales, and it ships in a leather sheath. Every Drifter comes with a small batch tin of Grady's blade wax.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Drifter\u003c\/li\u003e\n\u003cli\u003eBlade Length: Approximately 4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: Approximately 8.5\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: O1 tool steel\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Darkened stonewash\u003c\/li\u003e\n\u003cli\u003eHandle Material: Green linen micarta\u003c\/li\u003e\n\u003cli\u003eGrip: Full four finger\u003c\/li\u003e\n\u003cli\u003eSheath: Leather\u003c\/li\u003e\n\u003cli\u003eIncluded: Small batch blade wax\u003c\/li\u003e\n\u003cli\u003eMaker: Grady Jarman\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Wilmington, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: SG-DRIFTER-O1-GRNLINEN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMade One at a Time\u003c\/h3\u003e\u003cp\u003eThese are hand made, so the numbers run close rather than exact. Figure on about a 4 inch blade at roughly 8.5 inches overall, with a handle that gives you a full four finger grip. Grady does the grinding, the handle work, and the finishing himself, which is why no two come out identical.\u003c\/p\u003e\u003ch3\u003eO1 Tool Steel\u003c\/h3\u003e\u003cp\u003eO1 is a carbon tool steel that takes a keen edge and comes back sharp with very little effort on a stone. It is not stainless, so it will patina with use and wants to be kept dry and waxed. The darkened stonewash finish adds some protection and hides the marks that come with using a knife, and the wax tin in the box is there for exactly that job.\u003c\/p\u003e\u003ch3\u003eGreen Linen Micarta\u003c\/h3\u003e\u003cp\u003eLinen micarta is layered fabric set in resin, and it gets more grip as your hands get wet. The green here is a quieter color that ages well and shows the layering along the contours of the handle.\u003c\/p\u003e\u003ch3\u003eLeather Sheath\u003c\/h3\u003e\u003cp\u003eThis one carries in a leather sheath, which is the traditional pairing for a carbon steel blade and breaks in to the knife over time.\u003c\/p\u003e\u003ch3\u003eAbout Shady Grady EDC\u003c\/h3\u003e\u003cp\u003eGrady Jarman is a retired professional firefighter who makes knives and turns pens part time in Wilmington, North Carolina. This is a one man shop, and the output is small on purpose.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eA hand made carbon steel fixed blade from a retired firefighter in North Carolina, with a leather sheath and a tin of wax in the box. There is one of these here.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Shady Grady EDC","offers":[{"title":"Default Title","offer_id":44378892304564,"sku":"SG-DRIFTER-O1-GRNLINEN","price":250.0,"currency_code":"USD","in_stock":true}]},{"product_id":"shady-grady-edc-drifter-fixed-blade-o1-darkened-stonewash-blue-grip-tex-kydex-sheath-made-in-usa-sg-drifter-o1-blugriptex","title":"Shady Grady EDC Drifter Fixed Blade - O1 Darkened Stonewash, Blue GripX, Kydex Sheath - Made in USA (SG-DRIFTER-O1-BLUGRIPX)","description":"\u003cp\u003eThis is the Drifter from Shady Grady EDC, made by Grady Jarman in Wilmington, North Carolina. This one runs an O1 tool steel blade in a darkened stonewash finish with blue GripX scales, and it ships in a Kydex sheath. Every Drifter comes with a small batch tin of Grady's blade wax.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Drifter\u003c\/li\u003e\n\u003cli\u003eBlade Length: Approximately 4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: Approximately 8.5\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: O1 tool steel\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Darkened stonewash\u003c\/li\u003e\n\u003cli\u003eHandle Material: Blue GripX by Grip-Tec Composites\u003c\/li\u003e\n\u003cli\u003eGrip: Full four finger\u003c\/li\u003e\n\u003cli\u003eSheath: Kydex\u003c\/li\u003e\n\u003cli\u003eIncluded: Small batch blade wax\u003c\/li\u003e\n\u003cli\u003eMaker: Grady Jarman\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Wilmington, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: SG-DRIFTER-O1-BLUGRIPX\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMade One at a Time\u003c\/h3\u003e\u003cp\u003eThese are hand made, so the numbers run close rather than exact. Figure on about a 4 inch blade at roughly 8.5 inches overall, with a handle that gives you a full four finger grip. Grady does the grinding, the handle work, and the finishing himself, which is why no two come out identical.\u003c\/p\u003e\u003ch3\u003eO1 Tool Steel\u003c\/h3\u003e\u003cp\u003eO1 is a carbon tool steel that takes a keen edge and comes back sharp with very little effort on a stone. It is not stainless, so it will patina with use and wants to be kept dry and waxed. The darkened stonewash finish adds some protection and hides the marks that come with using a knife, and the wax tin in the box is there for exactly that job.\u003c\/p\u003e\u003ch3\u003eBlue GripX\u003c\/h3\u003e\u003cp\u003eGripX is a rubber infused composite resin made by Grip-Tec Composites, and it is the only handle material on this list designed around grip first. The rubber in the resin means it stays planted when your hands are wet, muddy, or cold, without the aggressive texturing that chews up your palm on a long job. It is waterproof and made in the USA.\u003c\/p\u003e\u003ch3\u003eKydex Sheath\u003c\/h3\u003e\u003cp\u003eKydex is the low maintenance option. It holds the knife with a positive click, does not care about water, and is easy to rinse out after a messy job.\u003c\/p\u003e\u003ch3\u003eAbout Shady Grady EDC\u003c\/h3\u003e\u003cp\u003eGrady Jarman is a retired professional firefighter who makes knives and turns pens part time in Wilmington, North Carolina. This is a one man shop, and the output is small on purpose.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eThis is the working man's build of the group. A grip focused handle material, a Kydex sheath, and carbon steel, made by hand in North Carolina.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Shady Grady EDC","offers":[{"title":"Default Title","offer_id":44378892337332,"sku":"SG-DRIFTER-O1-BLUGRIPX","price":225.0,"currency_code":"USD","in_stock":true}]},{"product_id":"shady-grady-edc-drifter-fixed-blade-satin-12c27-three-color-burlap-micarta-leather-sheath-made-in-usa-sg-drifter-12c27-burlap3","title":"Shady Grady EDC Drifter Fixed Blade - Satin 12C27, Three Color Burlap Micarta, Leather Sheath - Made in USA (SG-DRIFTER-12C27-BURLAP3)","description":"\u003cp\u003eThis is the Drifter from Shady Grady EDC, made by Grady Jarman in Wilmington, North Carolina. This one runs a Sandvik 12C27 stainless blade in a satin finish with three color burlap micarta scales, and it ships in a leather sheath. Every Drifter comes with a small batch tin of Grady's blade wax.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Drifter\u003c\/li\u003e\n\u003cli\u003eBlade Length: Approximately 4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: Approximately 8.5\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: Sandvik 12C27 stainless\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Satin\u003c\/li\u003e\n\u003cli\u003eHandle Material: Three color burlap micarta\u003c\/li\u003e\n\u003cli\u003eGrip: Full four finger\u003c\/li\u003e\n\u003cli\u003eSheath: Leather\u003c\/li\u003e\n\u003cli\u003eIncluded: Small batch blade wax\u003c\/li\u003e\n\u003cli\u003eMaker: Grady Jarman\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Wilmington, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: SG-DRIFTER-12C27-BURLAP3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMade One at a Time\u003c\/h3\u003e\u003cp\u003eThese are hand made, so the numbers run close rather than exact. Figure on about a 4 inch blade at roughly 8.5 inches overall, with a handle that gives you a full four finger grip. Grady does the grinding, the handle work, and the finishing himself, which is why no two come out identical.\u003c\/p\u003e\u003ch3\u003eSandvik 12C27 Stainless\u003c\/h3\u003e\u003cp\u003eMost of the Drifters in this batch are carbon steel. This one is not. Sandvik 12C27 is a fine grained stainless that sharpens easily and holds up in wet conditions without the upkeep a carbon blade asks for. If you want a knife you can take fishing or leave in a pack without worrying about it, this is the one to take.\u003c\/p\u003e\u003ch3\u003eThree Color Burlap Micarta\u003c\/h3\u003e\u003cp\u003eBurlap micarta is coarser than linen and shows a lot more texture in the layering. Running three colors through it means the contours of the handle expose different bands as they were shaped, so the pattern on this handle exists only on this handle.\u003c\/p\u003e\u003ch3\u003eLeather Sheath\u003c\/h3\u003e\u003cp\u003eThis one carries in a leather sheath, which breaks in to the knife over time and softens with use.\u003c\/p\u003e\u003ch3\u003eAbout Shady Grady EDC\u003c\/h3\u003e\u003cp\u003eGrady Jarman is a retired professional firefighter who makes knives and turns pens part time in Wilmington, North Carolina. This is a one man shop, and the output is small on purpose.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eOne of only two stainless Drifters in this batch, with the most visually interesting handle of the group. Hand made in North Carolina.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Shady Grady EDC","offers":[{"title":"Default Title","offer_id":44378892370100,"sku":"SG-DRIFTER-12C27-BURLAP3","price":250.0,"currency_code":"USD","in_stock":true}]},{"product_id":"shady-grady-edc-drifter-fixed-blade-o1-darkened-stonewash-red-and-black-g10-kydex-sheath-made-in-usa-sg-drifter-o1-redblkg10","title":"Shady Grady EDC Drifter Fixed Blade - O1 Darkened Stonewash, Red and Black G10, Kydex Sheath - Made in USA (SG-DRIFTER-O1-REDBLKG10)","description":"\u003cp\u003eThis is the Drifter from Shady Grady EDC, made by Grady Jarman in Wilmington, North Carolina. This one runs an O1 tool steel blade in a darkened stonewash finish with red and black G10 scales, and it ships in a Kydex sheath. Every Drifter comes with a small batch tin of Grady's blade wax.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Drifter\u003c\/li\u003e\n\u003cli\u003eBlade Length: Approximately 4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: Approximately 8.5\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: O1 tool steel\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Darkened stonewash\u003c\/li\u003e\n\u003cli\u003eHandle Material: Red and black G10\u003c\/li\u003e\n\u003cli\u003eGrip: Full four finger\u003c\/li\u003e\n\u003cli\u003eSheath: Kydex\u003c\/li\u003e\n\u003cli\u003eIncluded: Small batch blade wax\u003c\/li\u003e\n\u003cli\u003eMaker: Grady Jarman\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Wilmington, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: SG-DRIFTER-O1-REDBLKG10\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMade One at a Time\u003c\/h3\u003e\u003cp\u003eThese are hand made, so the numbers run close rather than exact. Figure on about a 4 inch blade at roughly 8.5 inches overall, with a handle that gives you a full four finger grip. Grady does the grinding, the handle work, and the finishing himself, which is why no two come out identical.\u003c\/p\u003e\u003ch3\u003eO1 Tool Steel\u003c\/h3\u003e\u003cp\u003eO1 is a carbon tool steel that takes a keen edge and comes back sharp with very little effort on a stone. It is not stainless, so it will patina with use and wants to be kept dry and waxed. The darkened stonewash finish adds some protection and hides the marks that come with using a knife, and the wax tin in the box is there for exactly that job.\u003c\/p\u003e\u003ch3\u003eRed and Black G10\u003c\/h3\u003e\u003cp\u003eG10 is layered glass fiber in resin, harder and more weather proof than micarta. Layering red under black means the contours cut through to red where the handle was shaped, so the color follows the shape of the grip rather than sitting on top of it.\u003c\/p\u003e\u003ch3\u003eKydex Sheath\u003c\/h3\u003e\u003cp\u003eKydex is the low maintenance option. It holds the knife with a positive click, does not care about water, and is easy to rinse out after a messy job.\u003c\/p\u003e\u003ch3\u003eAbout Shady Grady EDC\u003c\/h3\u003e\u003cp\u003eGrady Jarman is a retired professional firefighter who makes knives and turns pens part time in Wilmington, North Carolina. This is a one man shop, and the output is small on purpose.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eRed and black on a darkened blade is the sharpest looking build in this batch, and G10 with Kydex makes it the easiest one to actually put to work.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Shady Grady EDC","offers":[{"title":"Default Title","offer_id":44378892402868,"sku":"SG-DRIFTER-O1-REDBLKG10","price":225.0,"currency_code":"USD","in_stock":true}]},{"product_id":"shady-grady-edc-drifter-fixed-blade-o1-darkened-stonewash-orange-and-yellow-g10-honeycomb-kydex-sheath-made-in-usa-sg-drifter-o1-orgyelg10","title":"Shady Grady EDC Drifter Fixed Blade - O1 Darkened Stonewash, Orange and Yellow G10, Honeycomb Kydex Sheath - Made in USA (SG-DRIFTER-O1-ORGYELG10)","description":"\u003cp\u003eThis is the Drifter from Shady Grady EDC, made by Grady Jarman in Wilmington, North Carolina. This one runs an O1 tool steel blade in a darkened stonewash finish with orange and yellow G10 scales, and it ships in a honeycomb pattern Kydex sheath. Every Drifter comes with a small batch tin of Grady's blade wax.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Drifter\u003c\/li\u003e\n\u003cli\u003eBlade Length: Approximately 4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: Approximately 8.5\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: O1 tool steel\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Darkened stonewash\u003c\/li\u003e\n\u003cli\u003eHandle Material: Orange and yellow G10\u003c\/li\u003e\n\u003cli\u003eGrip: Full four finger\u003c\/li\u003e\n\u003cli\u003eSheath: Kydex, honeycomb pattern\u003c\/li\u003e\n\u003cli\u003eIncluded: Small batch blade wax\u003c\/li\u003e\n\u003cli\u003eMaker: Grady Jarman\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Wilmington, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: SG-DRIFTER-O1-ORGYELG10\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMade One at a Time\u003c\/h3\u003e\u003cp\u003eThese are hand made, so the numbers run close rather than exact. Figure on about a 4 inch blade at roughly 8.5 inches overall, with a handle that gives you a full four finger grip. Grady does the grinding, the handle work, and the finishing himself, which is why no two come out identical.\u003c\/p\u003e\u003ch3\u003eO1 Tool Steel\u003c\/h3\u003e\u003cp\u003eO1 is a carbon tool steel that takes a keen edge and comes back sharp with very little effort on a stone. It is not stainless, so it will patina with use and wants to be kept dry and waxed. The darkened stonewash finish adds some protection and hides the marks that come with using a knife, and the wax tin in the box is there for exactly that job.\u003c\/p\u003e\u003ch3\u003eOrange and Yellow G10\u003c\/h3\u003e\u003cp\u003eThis is the high visibility build. Orange and yellow layered G10 is what you want on a knife you might set down in leaves or grass, and it is the same logic behind blaze orange on hunting gear.\u003c\/p\u003e\u003ch3\u003eHoneycomb Kydex Sheath\u003c\/h3\u003e\u003cp\u003eThe sheath on this one is honeycomb pattern Kydex rather than plain. It holds the knife with a positive click, sheds water, and the pattern gives it a look that matches the handle.\u003c\/p\u003e\u003ch3\u003eAbout Shady Grady EDC\u003c\/h3\u003e\u003cp\u003eGrady Jarman is a retired professional firefighter who makes knives and turns pens part time in Wilmington, North Carolina. This is a one man shop, and the output is small on purpose.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eBright handle, patterned sheath, carbon steel blade. This is the one that will not get lost in the field, and it is the only honeycomb sheath in the batch.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Shady Grady EDC","offers":[{"title":"Default Title","offer_id":44378892435636,"sku":"SG-DRIFTER-O1-ORGYELG10","price":225.0,"currency_code":"USD","in_stock":true}]},{"product_id":"shady-grady-edc-drifter-fixed-blade-o1-darkened-stonewash-paper-micarta-leather-sheath-made-in-usa-sg-drifter-o1-papermic","title":"Shady Grady EDC Drifter Fixed Blade - O1 Darkened Stonewash, Paper Micarta, Leather Sheath - Made in USA (SG-DRIFTER-O1-PAPERMIC)","description":"\u003cp\u003eThis is the Drifter from Shady Grady EDC, made by Grady Jarman in Wilmington, North Carolina. This one runs an O1 tool steel blade in a darkened stonewash finish with paper micarta scales, and it ships in a leather sheath. Every Drifter comes with a small batch tin of Grady's blade wax.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Drifter\u003c\/li\u003e\n\u003cli\u003eBlade Length: Approximately 4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: Approximately 8.5\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: O1 tool steel\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Darkened stonewash\u003c\/li\u003e\n\u003cli\u003eHandle Material: Paper micarta\u003c\/li\u003e\n\u003cli\u003eGrip: Full four finger\u003c\/li\u003e\n\u003cli\u003eSheath: Leather\u003c\/li\u003e\n\u003cli\u003eIncluded: Small batch blade wax\u003c\/li\u003e\n\u003cli\u003eMaker: Grady Jarman\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Wilmington, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: SG-DRIFTER-O1-PAPERMIC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMade One at a Time\u003c\/h3\u003e\u003cp\u003eThese are hand made, so the numbers run close rather than exact. Figure on about a 4 inch blade at roughly 8.5 inches overall, with a handle that gives you a full four finger grip. Grady does the grinding, the handle work, and the finishing himself, which is why no two come out identical.\u003c\/p\u003e\u003ch3\u003eO1 Tool Steel\u003c\/h3\u003e\u003cp\u003eO1 is a carbon tool steel that takes a keen edge and comes back sharp with very little effort on a stone. It is not stainless, so it will patina with use and wants to be kept dry and waxed. The darkened stonewash finish adds some protection and hides the marks that come with using a knife, and the wax tin in the box is there for exactly that job.\u003c\/p\u003e\u003ch3\u003ePaper Micarta\u003c\/h3\u003e\u003cp\u003ePaper micarta is the finest grained micarta there is, which makes it the smoothest in hand and the one that shows the tightest layer lines when it is shaped. It also takes a patina from skin oils over the years, so a well carried paper micarta handle looks different from a new one.\u003c\/p\u003e\u003ch3\u003eLeather Sheath\u003c\/h3\u003e\u003cp\u003eThis one carries in a leather sheath, which suits the quieter, more traditional look of a paper micarta handle on a carbon steel blade.\u003c\/p\u003e\u003ch3\u003eAbout Shady Grady EDC\u003c\/h3\u003e\u003cp\u003eGrady Jarman is a retired professional firefighter who makes knives and turns pens part time in Wilmington, North Carolina. This is a one man shop, and the output is small on purpose.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eCarbon steel, paper micarta, and leather is about as classic as a modern hand made fixed blade gets. This is the understated one in the batch.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Shady Grady EDC","offers":[{"title":"Default Title","offer_id":44378892468404,"sku":"SG-DRIFTER-O1-PAPERMIC","price":250.0,"currency_code":"USD","in_stock":true}]},{"product_id":"shady-grady-edc-drifter-fixed-blade-satin-12c27-burlap-and-green-micarta-leather-sheath-made-in-usa-sg-drifter-12c27-burlapgrn","title":"Shady Grady EDC Drifter Fixed Blade - Satin 12C27, Burlap and Green Micarta, Leather Sheath - Made in USA (SG-DRIFTER-12C27-BURLAPGRN)","description":"\u003cp\u003eThis is the Drifter from Shady Grady EDC, made by Grady Jarman in Wilmington, North Carolina. This one runs a Sandvik 12C27 stainless blade in a satin finish with a combination handle of three color burlap micarta and green micarta, and it ships in a leather sheath. Every Drifter comes with a small batch tin of Grady's blade wax.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Drifter\u003c\/li\u003e\n\u003cli\u003eBlade Length: Approximately 4\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: Approximately 8.5\"\u003c\/li\u003e\n\u003cli\u003eBlade Steel: Sandvik 12C27 stainless\u003c\/li\u003e\n\u003cli\u003eBlade Finish: Satin\u003c\/li\u003e\n\u003cli\u003eHandle Material: Combination three color burlap micarta and green micarta\u003c\/li\u003e\n\u003cli\u003eGrip: Full four finger\u003c\/li\u003e\n\u003cli\u003eSheath: Leather\u003c\/li\u003e\n\u003cli\u003eIncluded: Small batch blade wax\u003c\/li\u003e\n\u003cli\u003eMaker: Grady Jarman\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA (Wilmington, North Carolina)\u003c\/li\u003e\n\u003cli\u003eSKU: SG-DRIFTER-12C27-BURLAPGRN\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMade One at a Time\u003c\/h3\u003e\u003cp\u003eThese are hand made, so the numbers run close rather than exact. Figure on about a 4 inch blade at roughly 8.5 inches overall, with a handle that gives you a full four finger grip. Grady does the grinding, the handle work, and the finishing himself, which is why no two come out identical.\u003c\/p\u003e\u003ch3\u003eSandvik 12C27 Stainless\u003c\/h3\u003e\u003cp\u003eThis is one of two stainless Drifters in the batch. Sandvik 12C27 is a fine grained stainless that sharpens easily and holds up in wet conditions without the upkeep a carbon blade asks for. It is a good pick for a knife that lives in a pack or a tackle box.\u003c\/p\u003e\u003ch3\u003eThe Combination Handle\u003c\/h3\u003e\u003cp\u003eThis is the fanciest handle in the batch. It combines three color burlap micarta with green micarta in one scale, so the coarse burlap texture and the green run together rather than sitting in separate blocks. How the colors surface depends entirely on how this specific handle was ground, which means the pattern here does not exist on any other knife.\u003c\/p\u003e\u003ch3\u003eLeather Sheath\u003c\/h3\u003e\u003cp\u003eThis one carries in a leather sheath, which breaks in to the knife over time and softens with use.\u003c\/p\u003e\u003ch3\u003eAbout Shady Grady EDC\u003c\/h3\u003e\u003cp\u003eGrady Jarman is a retired professional firefighter who makes knives and turns pens part time in Wilmington, North Carolina. This is a one man shop, and the output is small on purpose.\u003c\/p\u003e\u003ch3\u003eWhy This One Stands Out\u003c\/h3\u003e\u003cp\u003eStainless steel and the most involved handle work in the batch. If you want a Drifter you can use hard and still look at, this is it.\u003c\/p\u003e\u003cp\u003eProudly carrying American\u003c\/p\u003e","brand":"Shady Grady EDC","offers":[{"title":"Default Title","offer_id":44378892501172,"sku":"SG-DRIFTER-12C27-BURLAPGRN","price":250.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/lonestarknife.com\/collections\/tacc-show-2026.oembed","provider":"Lone Star Knife \u0026 Supply","version":"1.0","type":"link"}