Hellbender Ranch Hand, 3.0" CPM-MagnaCut Sheepsfoot, Coyote Cerakote, Multicolored G10, Leather Sheath, Made in USA (HB-RANCHHAND-COY-TRI-LTHR)

The Ranch Hand is Hellbender's everyday belt knife, a 3 inch MagnaCut sheepsfoot on the same handle as their Outfitter. This one has a coyote Cerakote blade with multicolored G10 scales and a leather sheath. Made in Hilliard, Ohio.

Specifications

• Model: Ranch Hand
• Blade Length: 3.0"
• Overall Length: Approximately 7.0"
• Blade Steel: CPM-MagnaCut
• Blade Style: Sheepsfoot
• Blade Finish: Coyote Cerakote
• Blade Stock: 0.125"
• Hardness: 62-64 HRC
• Handle: Multicolored G10
• Handle Length: 4.00"
• Hardware: Stainless Torx
• Weight: 3.30 oz
• Sheath: Leather
• Country of Origin: Made in USA (Hilliard, Ohio)
• SKU: HB-RANCHHAND-COY-TRI-LTHR

The Ranch Hand

Hellbender built the Ranch Hand on the Outfitter handle with a shorter, thicker blade and a sheepsfoot grind. That gives you a full four finger grip on a 4 inch handle behind only a 3 inch blade, which is the balance most people actually want on a belt knife. At 3.3 ounces you stop noticing it.

The Sheepsfoot Grind

A sheepsfoot has a straight edge and a spine that drops to meet it, so there is no upswept point to catch on what you are cutting. It is the shape for opening boxes, breaking down feed bags, and working close to your other hand. The tradeoff is that you give up the piercing point of a drop point.

MagnaCut and Cerakote

MagnaCut is the steel to have on a working fixed blade. It takes a keen edge, holds it, and stays stainless enough that a wet day will not leave you scrubbing rust. Hellbender runs it at 62 to 64 HRC. The coyote Cerakote on top cuts glare and adds another layer of protection to the flats.

Multicolored G10

The layered G10 is milled for grip rather than just color, and the milling cuts through the layers so the pattern follows the shape of the handle. Every one comes out a little different depending on where the cutter went. This is the loudest Ranch Hand of the four and the only one with a patterned handle.

Made in Ohio

Hellbender is a small shop in Hilliard, Ohio, building under RECMAN USA. They do the work in house short of laser cutting and heat treat, and back every knife with a lifetime warranty and free sharpening for life.

Why This One Stands Out

The Ranch Hand is new to us, and this is the first time we have carried the model. One only in this handle.

Proudly carrying American