Skip to product information
1 of 7
Hypercut Manufacturing

Hypercut MFG Dharma Automatic Serial 0371 - 3.2" S45VN Tanto, Marbled Fat Carbon Inlays, Natural Titanium, Zirconium Pivot - Made in USA (HC-DHARMA-AUTO-0371)

Hypercut MFG Dharma Automatic Serial 0371 - 3.2" S45VN Tanto, Marbled Fat Carbon Inlays, Natural Titanium, Zirconium Pivot - Made in USA (HC-DHARMA-AUTO-0371)

Regular price $950.00 USD
Regular price Sale price $950.00 USD
Sale Sold out
Shipping calculated at checkout.
Quantity

The Dharma Automatic is Hypercut MFG's push button auto, machined by Dylan and his crew in Mills River, North Carolina. Serial 0371 runs a 3.2 inch CPM-S45VN tanto in a natural titanium frame with marbled Fat Carbon inlays and a zirconium pivot.

Go inside the shop: Inside Hypercut Manufacturing, How Dylan Davis Makes Premium Knives and Pens

The Colorway

The inlays are Fat Carbon in a black and silver marble pattern, with the layers swirling rather than running in straight lines. Fat Carbon lays up its sheets at angles instead of flat, so when the inlay gets machined down the cut exposes the layers as rings and waves. No two panels come out the same, and the two sides of this knife do not match each other.

Everything around the inlays is left in natural titanium, which keeps the attention on the pattern.

Specifications

  • Model: Dharma Automatic
  • Serial Number: 0371
  • Blade Length: 3.2"
  • Overall Length: 7.3"
  • Blade Steel: CPM-S45VN
  • Blade Shape: Tanto
  • Frames: Titanium, natural finish
  • Inlays: Fat Carbon, black and silver marble
  • Spacer: Titanium
  • Pivot: Zirconium
  • Clip: Titanium
  • Action: Push button automatic
  • Country of Origin: Made in USA (Mills River, North Carolina)
  • SKU: HC-DHARMA-AUTO-0371

The Zirconium Pivot

Zirconium is harder than titanium and takes a darker, slightly warmer finish. Dylan does not put one on every Dharma, so if you are comparing serial numbers this is the line on the spec card worth reading.

Hand Ground, One at a Time

Dylan grinds every bevel by hand on a belt sander rather than sending them out. As he puts it, a lot of makers believe the soul of the knife is in the bevel, and that is where his blood, sweat, and tears go. Building one means assembling and disassembling the same knife something like a hundred times before it ships.

S45VN and the Tanto

S45VN is the updated S35VN, with more chromium for better corrosion resistance and a finer grain that holds an edge longer. The tanto puts a second, shorter edge at the front at an angle to the main one, which leaves a lot of steel behind the point.

Made in North Carolina

Dylan started Hypercut with one used 1996 mill he bought off Facebook Marketplace and wired in himself. That machine still runs. Asked why he builds in America, his answer was short: because that is where he lives.

Why This One Stands Out

Black and silver marble on bare titanium is the quietest knife in this batch and the one with the most going on up close. One of one.

Proudly carrying American

View full details