McNees PM MAC2 3″ Knife – Diamond Green Titanium, MagnaCut Stonewash Blade, Frame Lock – Made in USA (2512)

Green titanium. Diamond milling. Stonewash throughout.

The Diamond Green MAC2 3" puts green anodized titanium on the MAC2 platform with Diamond milling across both handle scales and a fully stonewashed build. Green anodization on 6AL-4V titanium with stonewashed hardware and blade gives this compact frame lock a bold color with a practical, wear-friendly finish. At 3.1 oz and 6.625" overall, it is one of the most carry-efficient premium folders at this price point.

Note from Lone Star Knife & Supply: The PM MAC2 3" punches well above its price point. Jonathan McNees designed the PM line specifically to bring his level of fit and finish to a more accessible format without sending production overseas. The ceramic bearing action and titanium hardware at this price are hard to find from an American maker.

Green anodized titanium with Diamond milling produces a distinctive carry knife that stands out without going overboard. The stonewash blade and stonewashed hardware tie the build together, and the ceramic bearing pivot delivers smooth action from day one.

Specifications

• Overall Length: 6.625"
• Blade Length: 3.0"
• Blade Steel: CPM MagnaCut (63-64 HRC)
• Blade Finish: Stonewash
• Handle Material: 6AL-4V Titanium, Diamond milling
• Handle Finish: Green anodized
• Hardware: Stainless Steel, Stonewash finish
• Pivot: Caged ceramic bearings with ceramic detent ball
• Lock Type: Frame Lock
• Opening Method: Manual (Thumbstuds)
• Weight: 3.1 oz
• Country of Origin: Made in USA (Vernon, Alabama)

What Makes This MAC2 3" Stand Out

• 3.0" CPM MagnaCut blade at 63-64 HRC
• Diamond milled green anodized 6AL-4V titanium
• Stonewash blade and stonewashed stainless hardware throughout
• Caged ceramic bearings with ceramic detent ball
• 6.625" overall, 3.1 oz
• Frame lock with titanium clip
• Made in the USA

PM Line, USA Built

Jonathan McNees created the PM MAC2 line with one condition: it stays made in America. Machining is outsourced to US shops only, with fitting, detents, and sharpening handled in-house at the Alabama facility. Caged ceramic bearings and a ceramic detent ball give the MAC2 3" an action that competes with knives at significantly higher price points. CPM MagnaCut at 63-64 HRC handles the cutting performance side with no compromises.

About McNees Knives

McNees Knives is a veteran-owned small business out of Vernon, Alabama. Jonathan McNees has been refining his designs since 2010, building knives that combine custom-level machining with real-world carry performance. Every Dixon is hollow ground in-house at the Alabama shop. The PM line has outsourced machining done exclusively by US shops, with fitting, detents, and sharpening handled by Jonathan and his team directly. Made in the USA is not a marketing line here. It is how the shop operates.